door lock

Euro door lock was starting to fail. Bought a new Yale lock barrel to replace it. Unfortunately something inside the operation had come loose and had to snap the old lock to get it out. The new lock has slid in, the new key turns and engaged all the multi points and the door handle...

After a fairly normal drive, I found myself unable to lock my Suzuki Swift III 2006 with the fob and key. The central locking system works fine, but the fob does not work and even when I put the key into the door to lock manually, it does not work. I took the key apart, replaced the battery and...

The grill door on our Rangemaster 90 is locked. Any suggestions on how to unlock it.

One of the hook points on my uPVC door appears to have jammed after it was opened (a visitor managed to do it somehow) and whilst the rest of the lock mechanism seems to be working ok, it's stopping me from closing the door over. Does this sound like a full lock replacement job?

Hi please help I can’t remove the Euro cylinder screw from my UPVC door as the mullion plastic plate is difficult to remove, the top lock needs to be removed so the white plate can be slid out from the top but I can’t remove the top lock any advice how to remove it thanks

Hi, I'm thinking of buying a Yale No 1 Night Latch - used them for years, Brotish Kitemarked, and they look and feel pretty damn solid to me. I see that Banham are quite popular but also very expensive. Avocet are also premium keys. And Im sure theres lots more. My question is, is the Yale #1...

Hi I have a 12 year old Aquarius WD540P which has stopped part way through a wash cycle. The Door Locked LED was flashing, and the Wash LED was solid, it was unresponsive to the On/Off or Start /Cancel buttons, so switched off and then back on at the mains. Result was Door lock LED off and the...

Hello, I am trying to replace my old lock with new one but I am unable to get the old one out. the bottom latch rod seems to be twisted. I am not sure if that's by design or if that's a result of someone using excessive force previously. The rod seems to be quite hard and not easy to twist...

Hi I have a xljoinery internal oak door fitted in my garage between it and an side extension. Ideally I would like to have a 5 level sash lock in the door for an extra bit of security but I'm really not sure it one would fit. A typical 5 level lock requires a hole of 16-15mm width and a face...

Hi all Could anyone please help me with my front upvc front door. My ex did somthing to the door so once it's shut from the outside it won't open again unless I have the key so it's very easy to lock my self out. When am inside the door opens as normal. I can't work out what he has done to make...

hi guys, the door lock on my old zanussi aquacycle stopped working so I ordered a new one. Although it's fully compatible, the one that arrived is different and had a different wiring set up. The old one was black and had 3 spade connectors for fitting. The new one is cream and has 3 connectors...

Hello I need to replace the lock latch in the pictures attached but strugggling to find it online. Anyone can help? Thanks

Hello Need to replace this garden lock and not sure what to look for to find the exact same item. Help much appreciated