• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

dormer

  1. S

    20cm set back rule for lofts

    We are getting a rear loft built and I am confused about the 20cm set back rule, in particular on how it relates to the side of the house. We have a three-bed semi. The original roof sloped in from all three sides( hipped roof I believe in the technical jargon ). The roof has been removed...
  2. N

    Council Objection to 20cm eaves rule for Dormer

    Hi I am new to the forum but I have seen many helpful comments on other threads so appreciate if someone can guide me. I had a loft conversion done with a dormer about 2 years ago. I had involved an approved inspector from "Complete Building Control" to issue final certificate. The work was...
  3. Big Daddy

    Insulating 1970s dormers

    Hi everyone. I’ve never posted on a forum before but I'm having huge difficulties insulating our house and hoped someone here can please help me with some good advice? Our 1970’s house has a large dormer on the front and on the back, each spanning 3 rooms in width. Internal rooms have a...
  4. T

    Dormer extension over low sloping roof

    I would like to know if it is possible to do an L-shaped dormer extension on a certain Victorian terrace in London. The issue is that the rear of the house, which contains the bathroom on the first floor, has a low sloping roof that cuts off the corner of the room (see photos). My...
  5. P

    Lean-To Roof - Window Well or Not?

    Hi all, We are getting plans drawn up for a ground floor extension to our kitchen and dining room, with a lean-to roof. Because of the extension depth (4m) and roof angle this will clash with the bottom of the window on one of our upstairs bedrooms. A few of our neighbours have similar...
  6. C

    Insulating external stud wall

    We have a large timber framed dormer. It is made of standard 4"x2" studwork and rendered onto lath (which is a bit the worse for wear - but that's another job). Anyway, I'd like to get some insulation in as the internal plaster is off at the moment. So what is the best thing to use. I was...
Back
Top