Hi Everyone, I'm new here and dealing with a very bespoke system so please be gentle.
Basically there are two zones in the house. Upstairs (with hot water) and downstairs.
Originally the zones were controlled by two Horstmann H17 XL with separate thermostats in each zone.
So far I have...
I'd like to replace my DUAL channel Programmer made by Polypipe with HIVE mini receiver. I am not sure about the wiring.
The old polypipe programmer use 2 AA batteries.
HIVE use live wiring (N, L and Ground).
Here everything is clear.
Polypipe has dual pairing:
C1 - Brown...
Hey everyone, first time posting here but I am completely at a loss - looked through lots of the other posts and they all cover parts of my problem, but not the whole thing!
I bought a Hive dual channel as I incorrectly thought that's what I needed - turns out I only needed a single channel...
Hi, long story short my hive has been wired using a dual channel receiver on a viessmann combo boiler. Since removing the hub as I’m moving home, it only fires the boiler when I boost the hot water on the thermostat. Spoke to hive who said I should us the single channel receiver for the new...
I've spent days looking for a new Samsung TV with two specific features, but their website makes it almost impossible to check all technical specs, let alone compare, and often seems to contradict the features mentioned in eBay and Amazon listings.
I'm looking for a model around 50-55"...
I recently installed a hive dual thermostat to work alongside my Worcester Greenstar 34Cdi classic. The water side of things works perfectly. Boiler fires up, hey presto. The heating however does not fire the boiler. The heating only works if the water is on as well. Anyone got any ideas. Please...
I hope someone can help. I recently purchased a hive dual channel receiver for my Worcester boiler which works alongside an immersion tank. The existing system was a Honeywell setup consisting of:
- Wireless thermostat (battery powered in hallway)
- BDR91 Wireless relay box (in cupboard...
Can anyone help me with how to wire a hive dual channel receiver to a Baxi Platinum?
I know it should be a single channel receiver but is it still possible!?
See attached wiring diagram for the boiler and hive
I have Vitodens 100-w and its combi boiler. But, I have got hot water and heating version of hive. Main supply lines were coming directly to old thermostat and then were going to boiler main supply, I have kept it same in the diagram below.
Where to connect 1 and L from...
I mistakenly purchased a dual channel Hive self install from Amazon - but didn't realise why it was so cheap.
Anyway I thought - this should work - I can just ignore the hot water functionality.
My boiler is a Heatline S24 Compact Combi, which did have an external controller fitted...