galaxy g2-20

Hello I have a Galaxy G2-20 and an LCE-01-4 ethernet module to make use of ethernet functionality with an iPhone. Before connecting it up I wanted to check a few things. Enclosed is a picture of my Galaxy G2-20. It has a C020-01-C PCB with a Mk7 keypad and V2 wireless receiver connected...

Hello I have a Honeywell Galaxy 2-20 which uses wireless PIRs and sends alarm notifications via a telephone line. I am interested in a) being able to control the unit remotely (eg on an iPhone or virtual keypad) b) receiving text (and possibly email/call) messages on alarm (and possibly...

Hi all - I've installed an e080-2 ethernet module (F099 01 208 on the chip sticker) into a Honeywell galaxy g2-20 (v1.56), connecting rs485 A/B and aux power +/-. It's not working - the panel seems to recognise the correct number of modules on the bus, but ethernet diagnostics under menu 60...

Hi, I've just upgraded my G2 C-012 alarm with the ethernet module. I've connected the wires and powered up with no fault code. However, i'm not sure what information i should be inputting into the mobile app to connect to the panel. Is anyone able to help?

Hi, I'm having a problem with one of my keyprox modules (address 1), when I went out earlier on I used it to full set via pin number, when I came home again it wouldn't respond to a fob to unset or accept a pin, subsequently the alarm triggered and had to be unset from a second keypad (address...

Hi all, I recently posted a question asking about a 24h contact with override key switch (http://tinyurl.com/jdtyw6f) I have installed the zone with the key switch to shunt the contact with so the gate can be opened without the alarm activating, however I am now getting an open signal from the...

Hi all, Just wondering if anyone could help me to figure out how to use a 24 hour zone on my Galaxy G2-20 whilst maintaining the ability to deactivate the zone when required? I have seen this done in a company I used to work for where the fire doors where monitored for breaches but one door...