glass balustrade

Hi all, I'm planning to replace the wooden spindle balustrade on my first floor landing with glass and oak, and I'd like a sanity check on the building regs position before I order anything. I have attached a very crude/basic top down view of what is currently in place. It'll stay the same...

When I fitted an 8mm glass balustrade on the landing I found that I had not screwed down the base rail perfectly straight, so it was a bit of a struggle getting the glass to fit. Luckily the landing was only a short section, and I was also able to adjust a few screws to get the glass to slip in...

Hi - I’ve been attempting to buy and put together oak fittings to house a glass balustrade and just looking for some advice (from those with more experience than me!), in how best to connect up the handrail most securely where it meets the ceiling of the ground floor. I have but Baserail in and...

Hi all, I have some stainless posts for a glass balustrade system. The floor is 20mm thick 600x600 porcelain tiles mounted on top of concrete blocks using a full bed of mortar. The bottom of the pole has three fixing holes. My original plan was to 'core' out the tile to the diameter of...

Hello I have purchased a glass balustrade system to fit to a 1m retaining outdoor wall (between patio and grass). I'll be using threaded rod to ensure a strong fixing but I just stated some templating today and noticed immediately the wall (from front to back i.e. the depth of it) is not...