upgrade

Hi everyone I am upgrading my Enforcer from V9.51 to V11 using the Pyronix Enforcer V11 upgrade kit, which comes with a new PCB and associated kit in the box. I notice that a new power cable that goes from the PSU to the front panel is included in the box, and this has an additional flylead on...

I have a 12-year old Worcester Bosch 37 CDi. The house has been extended (loft extension) a few years ago and it now has 7 double rads and 9 single rads all together. I've been told this is quite a lot for that boiler. We don't use much hot water because we have an electric shower and kitchen...

I currently have a Glow Worm Flexicom 24hx condensing boiler (13 years old) on the ground floor and a water tank and vented expansion tank in the loft. My home is a detached chalet style bungalow, ground floor and first floor with a small loft area above. It has 4 bedrooms with around 15...

I currently have underflooring heating, however the individual room thermostats are very old and have the bimetal side dial feature. I am wanting to see if it's possible to upgrade the thermostats to a more mordern, digital one. Although, I'm not sure the model of the exisiting thermostats. All...

Hi There, We need some help..please. We have been told SO many different things about this - its impossible to know who to believe. For the record - I'm a chef - not a gas engineer. We have been happily working from 2 commercial kitchens on the ground floor in our commercial catering premises...

Hi All, I'm trying to upgrade my existing Honeywell CM907 thermostat to a newer Honeywell Lyric T6 but can't quite figure out how to translate the wiring from one to the other. The wiring diagrams are attached - As you can see the CM907 has two wires going to it from the boiler but the T6 also...

Hi and thanks in advance to all the givers of advice here. I want to upgrade a Triton electric shower from 8.5kW to 9.5kW but would need to swap the existing 32a CU fuse for a 40a fuse. Is there a way for an idiot to safely tell what size the wiring is on that circuit as I gather I need 8mm for...

Hi all, I am a first-time buyer, so first-time home improver! Hopefully this is the right forum for this post... The house I am purchasing has a kitchen that I would like to 'upgrade' - but upgrade it cheaply (i.e not replace the entire thing). Do you guys have any suggestions how to improve...

Hi I've currently got installed an 8.5kw shower, on 10mm wiring clipped to the inside of stud walls. It's on a B40 MCB with a 30mA RCD. The stud walls may have some sound deadening material in them from what I can see, and the cable run is around 10m. The shower has started to misbehave and...