I have a 105e combi fitted around 2yrs, everything has been fine and also had regular servicing. I must also say that i am rgi and have fixed many problems boilers over the years but my main area is aga/rayburn appliances.
The system was also mains flushed before 105e was fitted.
I have already checked that the diapham and hw thermister is ok, but changed them anyway, the microswitch is making and the gas pressures are ok.
My question is to you guys :-
do you think that the divertor valve could be the problem, as the buner pressure stays on max gas rate but water gets no hotter so the heat must be going somwhere. (ie ch flow pipe)
thanks steve.
The system was also mains flushed before 105e was fitted.
I have already checked that the diapham and hw thermister is ok, but changed them anyway, the microswitch is making and the gas pressures are ok.
My question is to you guys :-
do you think that the divertor valve could be the problem, as the buner pressure stays on max gas rate but water gets no hotter so the heat must be going somwhere. (ie ch flow pipe)
thanks steve.