Many Thanks for all those who helped with this thread //www.diynot.com/forums/viewtopic.php?t=206367
I will today do this job in my loft.
I will use the redundent 10mm cable to feed a fused spur and from the output side I will feed a double socket and another fused spur for the digital shower.
is this the correct fuse spur to use? http://www.keene.co.uk/electronics/multi.php?mycode=SWL1 or can I get a double sized one so that the 10mm cables go in easier?
Also at my wylex dual RCD consumer unit the 10mm cable is protected by a 40amp mcb - shall I also downgrade this mcb?
Thanks
Happy New Year
I will today do this job in my loft.
I will use the redundent 10mm cable to feed a fused spur and from the output side I will feed a double socket and another fused spur for the digital shower.
is this the correct fuse spur to use? http://www.keene.co.uk/electronics/multi.php?mycode=SWL1 or can I get a double sized one so that the 10mm cables go in easier?
Also at my wylex dual RCD consumer unit the 10mm cable is protected by a 40amp mcb - shall I also downgrade this mcb?
Thanks
Happy New Year