2 flow and 2 return pipes feeding upstairs
- Thread starter CAESAR32
- Start date
I am guessing you have a back boiler and a gravity fed system my friend.
Most defianately.
Fire up the CH if all 4 get warm you may have a problem if not your laughing
Sorry but maybe not a big problem.
What most likely has happened is that at the point the system has been changed to a combi and that at the point where they have capped the flow and return they have left these pipes in so not much to bother about really.
If you have the boiler in the airing cupboard then probably have used the gravity circs coupled up to the heating pipes at the back where the back boiler was.
Flow & return to upstairs heating, which you'd expect.
Flow and return to hot water cylinder, probably left in place because the bathroom radiator/towel rail is often connected to this so as to provide some warmth in the bathroom and towel drying outside the usual heating season.
Flow and return to hot water cylinder, probably left in place because the bathroom radiator/towel rail is often connected to this so as to provide some warmth in the bathroom and towel drying outside the usual heating season.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
