22mm compression nut with 3/4 parralel thread

[SMG]

Searched hi & lo for this compression nut, fits DHW cylinder. None at local plumbers merchants.

Compression nut which accepts a 22 mm pipe & olive, but has a 3/4" BSP thread.

 

[45yearsagasman]

http://www.jtmplumbing.co.uk/solder...aight-cylinder-connector-2238-693_related.jpg
Is this what you mean? They have a tapered cone and screw straight on to a cylinder boss.

 

[Whitespirit66]

3/4" male iron?

http://www.tools4trade.com/d-98508031-22mm-x-34-male-iron-straight-112d6.aspx

 

[SMG]

The cyl has stainless steel fittings, basicly an externally threaded pipe, the inside diameter takes a 22 mm pipe & it is secured by a compression nut & olive.

If this fitting has a 3/4" compression nut, then thats what I want.

http://www.tools4trade.com/d-98726170-22mm-x-34-male-iron-straight-112d6.aspx

The book describes it as, Plumbing connections, inlet / outlet, 22mm compression fittings / 3/4 BSP Parralel thread.

 

[muggles]

Sounds like a Megaflo or Santon cylinder. You'll probably have to get them direct from Baxi or through a merchant such as City Heating Spares, they aren't a commonly-used thing away from these cylinders

 

[SMG]

It is a Santon m8, premier plus.

Found em,
Set of compression nut and olives: 95607838

Thanks guys.

 

[muggles]

Knew it, you need part number 95607838, which is a set of four nuts and olives

 

[muggles]

http://www.plumbcenter.co.uk/en/hea...olive-immersion-tool-19431?top_category=32458

 

[SMG]

Thanks Muggles, Just found them, thanks for the help.