Would someone like to tell me how it's done?
On the Wiki 2w diagram below could you cable and run a switch from the 1st switch position (RHS of picture) as a mirror image of the switch on the LHS .
Thus the switching method of the LHS would be duplicated from the RHS switch in the 3rd switch position ?
If not this way then how do people do a 3 way switching without using an intermediate?
Reason I ask is that I have recently done 3 way switching using MK grid switches to allow for a 2 gang switch doing 1 way and 3 way switching using intermediate 20a grid switch.
This makes the house non standard since all other switches are vanilla MK with this one exception.
I ripped out the old 3w switching (silly lad) without checking the method used, but the switches were all standard 2 way with L1, L2 and C.
Come on, dish the dirt and please explain the 'cheat'
On the Wiki 2w diagram below could you cable and run a switch from the 1st switch position (RHS of picture) as a mirror image of the switch on the LHS .
Thus the switching method of the LHS would be duplicated from the RHS switch in the 3rd switch position ?
If not this way then how do people do a 3 way switching without using an intermediate?
Reason I ask is that I have recently done 3 way switching using MK grid switches to allow for a 2 gang switch doing 1 way and 3 way switching using intermediate 20a grid switch.
This makes the house non standard since all other switches are vanilla MK with this one exception.
I ripped out the old 3w switching (silly lad) without checking the method used, but the switches were all standard 2 way with L1, L2 and C.
Come on, dish the dirt and please explain the 'cheat'