40mm internal fit

[Kelsall mcewen]

Hi. Is there any fitting that can fit internally into a 40mm pipe ?. I have a 40mm pipe sticking out of a pond side with the liner welded around it , so i can't fit a normal fitting externally without making the pond leak. What im after is something like a toilet pan connector (rubber fins pushing into soil pipe) but for a 40mm (1.5") pipe. It would then fit into an elbow to take an inflow pipe lower into the pond.

Thanks

Kelsall

 

[copea]

Looks like this would do the trick:
http://m.ebay.co.uk/itm/172257840676?_trksid=p2352135.m2548.l4275&_mwBanner=1

 

[SandyLyon]

Looks like this would do the trick:
http://m.ebay.co.uk/itm/172257840676?_trksid=p2352135.m2548.l4275&_mwBanner=1

I don't think that is what the OP is after, that's the same dia as his pipe. It's for use with sockets on fittings, but I can't understand why you would bother with one rather than using a short length of pipe.

 

[Kelsall mcewen]

Thanks for your reply. I think that fitting is a replacement for a short length of pipe, to fit into normal sockets. There probably is no internal fitting as i described because it would cause an obstruction. A toilet pan connector works because the flow is always in the same direction.

I think I'll have to give up or bodge something together. Cheers