43mm pipe to 32mm pipe...

[WetWilly]

Hi,

I need to connect a 43mm pipe to a 32mm pipe (both outside measurements).

I am having trouble finding a reducer that does this...does one exist?

Thank you.

 

[Plumber90]

What's the pipe for and made of?

 

[WetWilly]

Both pipes are plastic.

The 43mm pipe is a waste pipe, connected directly into my outside drain. (it used to be connected to a now removed belfast sink)

I want to connect this 43mm waste pipe to my aquarium, for easy water drainage, this is drilled at the bottom and can only use 32mm pipe due to the bulkhead fitting.

Thanks!

 

[Hugh Jaleak]

http://www.screwfix.com/p/floplast-wc38-universal-compression-waste-reducer-white-40mm-x-32mm/69077 That will join anything to anything in the waste pipe department. If both pipes are ABS then you can use a solvent reducer, 32-40mm.

 

[WetWilly]

http://www.screwfix.com/p/floplast-wc38-universal-compression-waste-reducer-white-40mm-x-32mm/69077 That will join anything to anything in the waste pipe department. If both pipes are ABS then you can use a solvent reducer, 32-40mm.

Sorry for being a complete idiot, I know absolutely nothing...that will fit my 43mm pipe? Thanks.

 

[Hugh Jaleak]

I can only assume the existing waste going to the drain is standard 40mm/1.5" waste, so yes, it will fit.

 

[Madrab]

Floplast .... noooooooo

If you can buy the McAlpine Multifit variant - ST28M - much better quality IMO

and yes - that will fit your waste pipe