• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

60's/70's Solid floor construction.

Joined
20 Apr 2007
Messages
1,600
Reaction score
138
Location
Cornwall
Country
United Kingdom
Bungalow built circa 1970 with solid floors throughout. Severe damp inside at floor level and lower walls. DPC visible on outer skin is level with interior floors, and well above ground level outside. What means of dampproofing of the floors was used in 60's and 70's? was a membrane used and if so what type? Also any ideas how to remedy this. I am wary of damp proofing specialists as they will try to sell a chemical DPC instead of solving the problem.

TIA
 
DPC my have failed or may be damaged.

any leaking gutters, over flows etc?
 
from what i remember a Polyethylene sheet full of holes placed on top of the hardcore
 
A DPM became a Reg in 1966 for a solid concrete floor. Although it was supposed to be lapped into the DPC it was often cut flush with the concrete. Labourers sometimes put the fork through it in places to let out the rainwater before concrete was placed.
 
Question: Has cavity wall insulation been installed? If so, this could be the cause of your problem!

Regards
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top