I've just replaced the remote keypad on my Accenta 6 home alarm system, which was about 12 years old. I've also had to replace the fuse for the keypad in the control panel. The problem I have is that the new keypad Accenta+ by ADE (8EP416) shows power is on but I can't set the new code. The external siren is going off and the keypad is warbling. Whatever I try to do has no effect. Any advice on how to reset the system and put a new code into the RKP. The new RKP is subtly different from the old one but both are made by ADE the original had a tamper light and the new one doesn't.
Any advice would be appreciated.
Any advice would be appreciated.