Hi all, I want to add a radiator in kitchen. I want to plumb it in from existing pipework going to my bathroom rad. My boiler is situated in the bathroom about 4 foot away from bathroom radiator..
From my boiler i have 22mm pipes for the flow and return, going to my bathroom towel rail i have 15mm pipes, is it ok to tee into these about 6 inches in from where they connect to the 22mm pipes?
I would like to connect them to 22mm pipes But it would be impossible to get any access to cut and add tee compressions on them as the pipes are solid and dont fancy messing the boiler pipes up.
I would like to tee in from the 15 mm using 10mm microbore to go to the kitchen, distance from 15mm pipes to the kicthen rad would be roughly 8-10 foot of microbore piping.
Ill try and draw a simple diagram to see if this method will work. Any help is greatly appreciated thanks in advance
Lee
From my boiler i have 22mm pipes for the flow and return, going to my bathroom towel rail i have 15mm pipes, is it ok to tee into these about 6 inches in from where they connect to the 22mm pipes?
I would like to connect them to 22mm pipes But it would be impossible to get any access to cut and add tee compressions on them as the pipes are solid and dont fancy messing the boiler pipes up.
I would like to tee in from the 15 mm using 10mm microbore to go to the kitchen, distance from 15mm pipes to the kicthen rad would be roughly 8-10 foot of microbore piping.
Ill try and draw a simple diagram to see if this method will work. Any help is greatly appreciated thanks in advance
Lee