Hi guys,
Have started ripping out our nasty old bathroom (pink walls/carpet, horrible tiles, avocado suite.... mmmm..)
Much of the walls are half-tiled and I've started removing them - not sure they were put on very well in the first place as I've removed most of them just by pulling them off by hand..
I only want tiles where needed in wet areas so will just re-plaster the other sections (and tile over if I make a pig's ear of it)
Now - with the walls now in the state as shown in the picture.. will I need to start with a bonding coat first? Should I PVA it first (I've seen mention that you shouldn't do this in bathrooms)
Any advice appreciated..
Have started ripping out our nasty old bathroom (pink walls/carpet, horrible tiles, avocado suite.... mmmm..)
Much of the walls are half-tiled and I've started removing them - not sure they were put on very well in the first place as I've removed most of them just by pulling them off by hand..
I only want tiles where needed in wet areas so will just re-plaster the other sections (and tile over if I make a pig's ear of it)
Now - with the walls now in the state as shown in the picture.. will I need to start with a bonding coat first? Should I PVA it first (I've seen mention that you shouldn't do this in bathrooms)
Any advice appreciated..