Advice :- using loft for storage in timber frame house

Joined
19 Jun 2007
Messages
55
Reaction score
0
Location
West Glamorgan
Country
United Kingdom
I would like to use the loft for storage for sentimental items & the annual things like decorations, suitcases, etc. - Nothing heavy (if a little bulky!) Span would be about 2.5m from rafter to rafter & the length about 4.5m. Joists look like 3 x 2 at about 600mm centres. I do not want to add anymore insulation as the house is fine in winter & already gets to warm in the summer!

My plan would be to deck an area of the loft + a little more so it is easier to get around if dealing with any electrical faults or replacing the bathroom fan ducting for example

I have looked at the different options & have come up with
1) loftzone solution, but worried about the weight distribution at set points.

2) Sistering using 7x2 to run alongside the current joists, however as it is a timber frame house the span would be resting on an internal timber frame, which I am not sure is a good idea.

3) Screwing/gluing 3x2 on top of current joists & then cross battening with 4x2, but I dont see how that does anything better than the other solutions.

any advice?
 

Attachments

  • Screenshot 2022-02-07 at 13.27.46.jpg
    Screenshot 2022-02-07 at 13.27.46.jpg
    329 KB · Views: 79
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top