Just switched over to an unvented cylinder system, with cylinder now in the loft. What's the best way to heat the airing cupboard? Thought about an extra rad in there, but obviously it wouldn't be much good in the summer.
Why not stick a rad in off of your primarys to the coil if the uvhwc is indirect. This will mean that the cupboard will still heat in the summer, or fit a 3 port valve and when the cylinder comes up to temp the valve will close on the stat and by-pass through to the return while the operation of the boiler is controlled by the clock and not the mirco switch in the 3 port.
Thats an idea cozzmic, but I think it may create a boiler interlock issue.
Is it really necessary for you to have heat in there? Assuming you have a drier I dont see the need for it
Chris R Do you ever sleep. You could put in a small electric heater working off a stat just to keep it aired. Mind and screen it off so your smalls don't fall onto it.
Artful, I thought about an electric heater. What sort of heat would you get from an 80W tubular, and what's the best way to run them, continuously or with a timer.
Quite a decent amount, certainly enough to dry your towels, trainers etc. I have one that I keep on all the time in my old ex-airing cupboard and my leccy bills are b-all nothing.
Mind you it looks like it belongs in a hospital, so stuck in a cupboard is the best place for it!
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local