Alpha 240 ECO

Joined
20 Dec 2007
Messages
2
Reaction score
0
Location
Oxford
Country
United Kingdom
Hi the problem i have with my system is when it is on timer it does not ignite the full flame but if i turn it off then back on again it lights up but it only stays on for a while and you have to keep starting it up to keep it going.Every now and again it does work ok for a while,like there is nothing wrong then it plays up again
Any ideas will be appreciated

Thanks Alan

also i have 5 rads upstairs and only 2 down could i put anothe rone down stairs?
 
From your vague description I would think it is a fan venturi partial blockage, corgi job though.

Yes you can easily add another rad downstairs.
 
Thankyou gas4you & bengasman for your replys am sorting out a service

Many thanks again
Alan
 
Venturi on these can look clear and be blown threw but they get little nodules on them that need to be scraped off so all works ok.. suprising how a tiny bit stops them work
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top