Hi all I wonder if anyone can help.
we have a aqualisa quartz that suddenly would only run tepid. Investigated on here and worked out that the processor was knackered.
Bought one of ebay and it looked in very good condition ( had to take it apart to extend the mains cable)
in the process of fitting it i damaged the data connection socket, so i removed that and swapped it with the old one. made sure all the soldering was good and nothing toching.
Finally connected it up and i have the controller lights (both the on/off and the boost lights) flashing on and off and it wont pump at all.
I have done some research and wondered if the data cable is faulty or wet, so i have taken it apart to dry.
I wondered if anyone has any ideas what could be wrong?
all help appreciated.
we have a aqualisa quartz that suddenly would only run tepid. Investigated on here and worked out that the processor was knackered.
Bought one of ebay and it looked in very good condition ( had to take it apart to extend the mains cable)
in the process of fitting it i damaged the data connection socket, so i removed that and swapped it with the old one. made sure all the soldering was good and nothing toching.
Finally connected it up and i have the controller lights (both the on/off and the boost lights) flashing on and off and it wont pump at all.
I have done some research and wondered if the data cable is faulty or wet, so i have taken it apart to dry.
I wondered if anyone has any ideas what could be wrong?
all help appreciated.