Yes. But flow is different.
Aqualisa showers and Expansion tank
- Thread starter 79diz
- Start date
Yes. But flow is different.
This was done a couple years ago and I made a note. I think its just of the cold taps. Ive re done it using the jug and 6 seconds.
Kitchen was
Cold 0.4ltrs Hot 0.4ltrs 6 secs x10, 4 litres which seems slow and lower? But if flow might not be?
I cant do the bath as ive taken the bath taps and pipes off.
The bathroom sink was
Cold 0.7ltrs x 10=7 Hot o.3 ltrs x10= 3
So is the only way to gauge pressure to buy a guage?
Kitchen was
Cold 0.4ltrs Hot 0.4ltrs 6 secs x10, 4 litres which seems slow and lower? But if flow might not be?
I cant do the bath as ive taken the bath taps and pipes off.
The bathroom sink was
Cold 0.7ltrs x 10=7 Hot o.3 ltrs x10= 3
So is the only way to gauge pressure to buy a guage?
Hi sorry for late response, thanks all for the input, ive been looking around and also spoke to a plumber frined and I think Uvented may be the way to go, do you have any recomendations, these are the two ive looked at, what do you think of these? https://www.plumbnation.co.uk/gledhill-direct-stainless-200l-unvented-cylinder-303-4989
https://www.mrcentralheating.co.uk/everflo-indirect-210l-unvented-cylinder-and-kit
https://www.mrcentralheating.co.uk/everflo-indirect-210l-unvented-cylinder-and-kit
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
