hi , cool forum .. any helpful hints into easy way to push up (slates (replacements) to lat above ..im struggling lol .. cant seem to bend upwards and slate aint on latt ..its below and frightened of a water leak many thanks
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
art of pushing up slate to latt
- Thread starter jasp
- Start date
Two ways I no of are:
1. Use a slate ripper, slide ripper onto lat then slide slate up then remove ripper
2. Push slate up to lat then slide it down about 1 inch then put a nail either side of slate. So the nails act like a see saw, push slate down then push up on to lat.
1. Use a slate ripper, slide ripper onto lat then slide slate up then remove ripper
2. Push slate up to lat then slide it down about 1 inch then put a nail either side of slate. So the nails act like a see saw, push slate down then push up on to lat.
Two ways I no of are:
1. Use a slate ripper, slide ripper onto lat then slide slate up then remove ripper
2. Push slate up to lat then slide it down about 1 inch then put a nail either side of slate. So the nails act like a see saw, push slate down then push up on to lat.
many many thanks had such a tough time is a art thanks so much
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
