Attaching 32mm pond hose to 110mm waste pipe

[ekmdgrf]

I have some 32mm pond hose (http://www.amazon.co.uk/1-25in-Corrugated-Black-Flexi-hose-metre/dp/B007V1ZE16) which I need (read: would like) to connect to a section of 110mm waste pipe. My Google foo must be weak, as I'm struggling to find a way to join the one to the other. I wonder if anyone with better pipe knowledge than myself can suggestion a way to forge a union between the two?

 

[Terrywookfit]

Are you wanting to connect onto the side or end of the 110mm pipe ??

 

[ekmdgrf]

Thanks for your reply. Onto the side

 

[Newboy]

http://www.screwfix.com/p/floplast-strap-boss-110mm-black-sp319bl/82795

 

[Terrywookfit]

You will need a "Stepped hose adaptor" . http://www.google.co.uk/aclk?sa=l&a...l-end-stepped-solvent-weld-1-5-inch-diameter/

 

[Hugh Jaleak]

Is this joint going to be under pressure? The standard push fit boss adaptor wont last long under pressure I suspect, may need to look at solvent welded versions if this pipework is to be subjected to pressure when in use.

 

[ekmdgrf]

I estimate the maximum pressure to be 0.1bar

 

[Terrywookfit]

You will need a solvent weld boss adaptor the stepped hose adaptors are solvent weld.