Hi,
I am completely lost and was hoping for some help.
I have just installed a pair of battenholders and have wired them back to a Pull Cord Switch. I have used 3 core wiring Live (Brown), Neutral (Blue) and Earth (Yellow/Green). I have tapped into an existing cable feeding the light switch in the landing which has Red (Live), Black (Neutral) and a bare cable (Earth).
The Switch has L1, L2, COM and Earth. So I wired all the earths together. I wired the Main Live to L1 and the Lives to the Lights to L2 and all the Neutrals to COM.
Given the switch came with no instructions and it isn't working I guess I've done something wrong
Any help would be appreciated.
Cheers
I am completely lost and was hoping for some help.
I have just installed a pair of battenholders and have wired them back to a Pull Cord Switch. I have used 3 core wiring Live (Brown), Neutral (Blue) and Earth (Yellow/Green). I have tapped into an existing cable feeding the light switch in the landing which has Red (Live), Black (Neutral) and a bare cable (Earth).
The Switch has L1, L2, COM and Earth. So I wired all the earths together. I wired the Main Live to L1 and the Lives to the Lights to L2 and all the Neutrals to COM.
Given the switch came with no instructions and it isn't working I guess I've done something wrong
Any help would be appreciated.
Cheers