Hello all, as I mentioned in the topic I have BIG BIG problem with my gearbox
(automatic DSG, audi a1 2013 1.4tfsi)
Okay so from begging, when I parked my car, the gear shift knob was stuck on the P (the diode ''P'' flashes all the time, and on the board have an inscription that I need to choose gear P or N), I can't even change the gear and I can't start the engine.
But when my car will stay around a couple of hours everything starting working till I drive a while, comeback to parking, will turn it off then I have same situation.
I was scanning with computer and there is ''Lost Communication with Transmission Control Module (TCM)'' (U0100100).
I checked all fuses, plugs and cables and everything is fine. I cleaned them also.
Is there can be any different option than chaning whole mechatronics system in the gearbox?
VIN number: WAUZZZ8X6EB025044
Engine type: CPTV
Gearbox type: PKV
Plate number: RV63FCY
Thank You for any advice.
(automatic DSG, audi a1 2013 1.4tfsi)
Okay so from begging, when I parked my car, the gear shift knob was stuck on the P (the diode ''P'' flashes all the time, and on the board have an inscription that I need to choose gear P or N), I can't even change the gear and I can't start the engine.
But when my car will stay around a couple of hours everything starting working till I drive a while, comeback to parking, will turn it off then I have same situation.
I was scanning with computer and there is ''Lost Communication with Transmission Control Module (TCM)'' (U0100100).
I checked all fuses, plugs and cables and everything is fine. I cleaned them also.
Is there can be any different option than chaning whole mechatronics system in the gearbox?
VIN number: WAUZZZ8X6EB025044
Engine type: CPTV
Gearbox type: PKV
Plate number: RV63FCY
Thank You for any advice.
