audio need help car

[dylankayaroberts]

Have got muntant HU and its 4 x 50w, which has remote blue wire connected to amped subwoofer enclosure, rcas, and the connector for all the wires.
Ripped out factory speakers in door panel which has four wires on it pink green black and brown, in the same bundle are two wires from the mirror tweeter.
Now got fly swat components 200w speakers in there now connected to the tweeter black and brown wires but only one of the speakers works, drivers side WHEN connected to these two wires.
So it must be faulty wire or it might be that the tweeter is just crap passenger side
So these four wires pink brown black and brown where does each go to standard speaker wire (2 wires) tried pink and green to one and black and brown to another in terminal block but again no sound only out of other speaker.
So could it be that the tweeter wires need to be wired in with the four others if so how?
Realise should just buzz wires but haven't got a multimeter and broke so, what else can try everthing works the speakers midrange in rear seat panels and the sub and amp are fine its just passenger side not working, which is annoying.
Not removing the connector with all the wires attached, that is connected to HU as the HU took hours upon hours to get in right and could do without the hassle.

 

[Belle427]

your new components should have come with crossovers,you need to identify the speaker positive and negative that comes into the door and connect to the crossovers then from there to your speaker mids and tweeters
if you have no sound after this suspect a broken wire in the door to pillar loom

 

[dylankayaroberts]

So postive and negative is marked on the components but the speaker wire has two stripes thick and thin which is negative and which is positive.
To make this clear there are four wires that came out of the factory speaker four only pink brown black green.
Two speaker wires come out of the tweeter black brown.
The mids are connected and working fine so not touching them, if have the component positive and negative wires ( 2 wires) what do connect them up to if just connect them to the tweeter wire get no sound so it has to be the coloured four wires as well.
For some reason the other component speaker works fine in the other door through tweeter wires, but doesnt passenger side.

 

[dylankayaroberts]

Also the tweeter wires seem to be connected via bundle to this four factory speaker wires but its not clear how.