BAL PTB Flexible Adhesive

[paulpa]

would BAL PTB Flexible Adhesive be my best option for a bathroom floor 18mm ply with tile backer boards 6mm . Or could i use single part flexible as this gives me a bit more time working
Would this also be required on walls or is a non flex ok?

 

[Richard C]

What tiles are you laying? What are your walls/floors made of? Do you have any wet areas?

 

[tictic]

as rich said...
tiles/subsrate/joist centres etc....

 

[Richard C]

as rich said...
tiles/subsrate/joist centres etc....

Well you knew I meant floors as well

 

[tictic]

....how you doing anyway bud...

OP.. the ptb is it the stone fix one?....anyway.. imo.. ptb all day long,Bal have brought their prices down a good bit in the last few months and ptb is probally the best addy out there to work with..

 

[Richard C]

Hiya tictac (as "Word" spell checker will always have you named ) I’m doing well as always m8. Off to Lanzarote early tomorrow morning to a super lux Villa for 8 days with some close friends; heated pool, outside beds, jacizzi, sauna, gym, pool table, the full works

So it’s an early night for me & short on time so if no OP response, I’ll leave it & “Tilling” in your good very good hands.

 

[tictic]

you enjoy yourself mate
as for the tiling forum,will try but am busy with work
so not been on much late.

not enough hours in the day at the moment...

 

[paulpa]

joists 400mm centres. floor 18mm wbp ply with tile backer boards screwed down. walls blockwork (new extension)
in bathroom and shower to be tiled too.
ceramic tiles.

 

[tictic]

ptb flex would be my choice..