Bath filler water pressure

[Notadecor8ter]

I have a bath filler and im really not sure its going to be decent enough pressure for filling a bath.

Its a scudo with valve. Lots of other oems using this design as well if it helps.

https://www.britishbathroomcompany....CAiD42nNu452Mj9p0VrKjbyW-sjHXt5N0mHOlFlQrE3d8

The pressure is slow and very poor on the cold feed with cold on 22mm dropped to a 15mm run with pegler isolator and then into a 3/4 15mm tap connector.

My gut here is the valve then has these on the connector with 8mm bore.

Am i on a hiding to nothing with this valve?

 

[Wayners]

This is where you need to know your water pressure and water flow rate.
There are digital water meters but they aren't cheap.
You could fill a bucket and time it for flow rate.

 

[HERTS P&D]

How is the water heated? Is it via a combi/unvented or gravity?

Any tanks in thre loft?

Andy

 

[Notadecor8ter]

Its unvented pressure isnt the issue