I am installing a new bath on sunday but have some questions. I know how to connect taps and waste outlets and the overflow, but after reading various posts/diy books/etc they all seem to vary.. on how to balance and spread the weight of the bath. My questions to you experts are :
Do baths all come with wall brackets built onto the sides?
Do they all require a plank of wood under the feet at both ends?
Do they all have a middle leg to spread the weight?
Is a wooden batten needed on the wall(s) that the bath is attached to?
Please give me some advice as the easiest and best way to safely install the bath and spread the weight as nothing makes sense!
Somebody also said that instructions come with baths... but these are rubbish apparently? Is this correct.....
Do baths all come with wall brackets built onto the sides?
Do they all require a plank of wood under the feet at both ends?
Do they all have a middle leg to spread the weight?
Is a wooden batten needed on the wall(s) that the bath is attached to?
Please give me some advice as the easiest and best way to safely install the bath and spread the weight as nothing makes sense!
Somebody also said that instructions come with baths... but these are rubbish apparently? Is this correct.....