Baxi 105 HE pressure drop

Joined
5 Oct 2008
Messages
231
Reaction score
6
Location
Nottingham
Country
United Kingdom
Hi :) Our baxi 105he combi has a problem. The pressure has dropped to under 0.5 bar in about a week. we've only used hot water, and when it dropped the boiler didn't fire, until topped up again. The pressure rose to 3 bar when heating was tested last week and the expansion vessel was re-charged and all was good, the pressure increased a little but not to 3 bar.

Is this possibly a small leak somewhere? Any ideas where to look?

Thanks for your help
 
Sponsored Links
If the pressure has been to 3 bar it has most likely discharged some water out of the pressure relief valve causing the pressure to drop.
It is also likely the PRV has not sealed properly and left you with a small leak.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top