- Joined
- 20 Oct 2021
- Messages
- 9
- Reaction score
- 6
- Country
Thanks for all your help, hopefully I will have properly working boiler in a few days time. Again your comments and help are very much appreciated.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Baxi 105e
- Thread starter Fruitcake Col
- Start date
-
- Tags
- baxi 105e
If changing yourself, before removing old PCB turn stats to 0 and selector to off, then using a screwdriver do the same with the replacement board and it will simply slip on, be carefull not to force anything, when you have fitted the replacement try turning all the knobs and make sure they turn freely, if they are stiff dont force them, it is possible to get the knob spindles 180 degrees out
- Joined
- 20 Oct 2021
- Messages
- 9
- Reaction score
- 6
- Country
Refurbished PCB fitted this afternoon, everything appears to be good. Ran heating for 90 mins and no return of fault, as yet (fingers crossed). Stat buttons seem to be a bit stiffer than before, but you can still turn them freely enough. Thanks to all
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
