Hi
Just wondering if any of you have experieced this problem before on a Baxi 105 he. I got called out to it over pressurising over 3 bar and not blowing off, I checked the expansion vessel and recharged and then pressure has seem to have steadied now and cure that.
However now it gets to 70 in the boiler and then cuts off and both the flame failure and the temperature lights on the display are flashing they can be reset until it reaches that temperature again and then same fault occurs. Never come across a problem like this before just wondered of anyone else has any ideas as to what it might be.
System details
Pressure 1 bar
All radiators Red hot and no cold ones
Got hot water at all outlets not a problem.
Just wondering if any of you have experieced this problem before on a Baxi 105 he. I got called out to it over pressurising over 3 bar and not blowing off, I checked the expansion vessel and recharged and then pressure has seem to have steadied now and cure that.
However now it gets to 70 in the boiler and then cuts off and both the flame failure and the temperature lights on the display are flashing they can be reset until it reaches that temperature again and then same fault occurs. Never come across a problem like this before just wondered of anyone else has any ideas as to what it might be.
System details
Pressure 1 bar
All radiators Red hot and no cold ones
Got hot water at all outlets not a problem.