There is power to the boiler terminal and power to switch.
Testing between 'a' and 1 on selector switch i get continuity when turned to reset. As per instructions.
Also a10 conn. I get continuity.....instruc. say replace pcb
Havnt had chance to test conponents as ive got a couple of pcbs i could interchange.
Any advice welcome......back 2moro to fit new pcb otherwise
Testing between 'a' and 1 on selector switch i get continuity when turned to reset. As per instructions.
Also a10 conn. I get continuity.....instruc. say replace pcb
Havnt had chance to test conponents as ive got a couple of pcbs i could interchange.
Any advice welcome......back 2moro to fit new pcb otherwise
