baxi 80e 105e hot water running hot and cold

Joined
4 Mar 2012
Messages
2
Reaction score
0
Location
Newcastle upon Tyne
Country
United Kingdom
Hi, Can any one help. I have a baxi 80e - 105e combi boiler. when running hot water it isgoing from hot then cold, boiler pressure is ok, and no falt coming up on the lighting panel. also the hot water is not running as hot as it should.
 
Sponsored Links
Plate heat exchanger scaled is the most likely reason
 
Sponsored Links
As already said, most likely the plate hex, and it can be cleaned.
Removing it is a bit of a juggling act though, if you have never done one.
If you do plan to do it yourself, then watch the pcb, when you take out hex, plenty of towels /kitchen roll needed, as these pcbs only need to sense water around and they go kapput
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top