Hello folks,
First off, I have very little knowladge of CH Systems, infact I have none!
Came in yesterday, digital timer was not lighting up, checked the fuse box and the CH trip switch was tripped. Flicked it on, timer was then back to life. However, the heating does not appear to be working now??????
I have looked at the baxi and the pilot light is on, hot water is still hot, but all rads are cold, the timer is switched on, I have even tried the boost buttom, but makes no difference.
The thermo switch is all sitting at 30c, (full blast) ..still nothing, I have tried reducing this too 15c, 20c, and 25c.......makes no difference.
I am not scared to have a go at trying to fix this if someone can suggest where the problem may be.
Any help would be greatly appreciated.
Regards
Stephen
First off, I have very little knowladge of CH Systems, infact I have none!
Came in yesterday, digital timer was not lighting up, checked the fuse box and the CH trip switch was tripped. Flicked it on, timer was then back to life. However, the heating does not appear to be working now??????
I have looked at the baxi and the pilot light is on, hot water is still hot, but all rads are cold, the timer is switched on, I have even tried the boost buttom, but makes no difference.
The thermo switch is all sitting at 30c, (full blast) ..still nothing, I have tried reducing this too 15c, 20c, and 25c.......makes no difference.
I am not scared to have a go at trying to fix this if someone can suggest where the problem may be.
Any help would be greatly appreciated.
Regards
Stephen