Baxi Bahama wireless room thermostat

[Dillmiester]

I wish to fit a wirless room thermostat to my Baxi Bahama 100 Combi boiler. Im using Danfoss TP5000-RF With RX1 Receiver Ive got the RX1 powered up and is talking to the TP5000 room stat. Now all I need to do is connect the RX1 up to the boiler. The RX1 has 3 connections - COM - ZONE1ON - ZONE1OFF The boiler connection block has options for a 2 wire room tstat or a 3 wire room tstat. I dont know which to use I have the wiring diagram for the controllers and boiler but dont know what goes where. I have a basic understanding of electronics and im sure Im only a few wires away from getting it working. Please help.

Wiring instructions are here
http://www.photobucket.com/albums/a47/dillmiester/

 

[Slugbabydotcom]

Wire 2 and 3 on the stat receiver to 3 and 4 on the boiler
Instructions HERE

 

[Dillmiester]

Thanks for that, its all up and running now.

Cheers

Chris