Baxi Bermuda inset back boiler

[GaryinAshby]

I've got a Baxi Inset back boiler, fitted about 5 to 6 years ago. When you initially switch it on, the ignitor clicks around 15 times before the burners ignite. My neighbour had exactly the same model fitted at the same time & his only clicks 3 or 4 times before it ignites.

When mine was last serviced I was told that there could be a bit of muck in the burner, but that part is sealed & you can't get at it.

Is that right? My boiler knowledge is limited, but I would have thought that could be done?

 

[namsag]

The main burner is a sealed burner but this can also be washed out under a tap,
But thats not the problem your pilot needs cleaning and very seldom on these do they need renewing.
There is also a small hole to allow air for the pilot to burn an light properly this will need cleaning out.
Very simply your boiler needs a proper service.

 

[GaryinAshby]

Very simply your boiler needs a proper service.

I think you've summed it up. I'll look for a different (recommended) service engineer.