Baxi duotec 28he probs
- Thread starter jimmy1022
- Start date
Sponsored Links
M.I s are manufacturers instructions 
to give you an example..... had a boiler showing an overheat/overrun problem. boiler 4 months old
removed pumphead, pump impellor choked with welders snotters
picked out all detritus, refitted, all good
best of luck
to give you an example..... had a boiler showing an overheat/overrun problem. boiler 4 months old
removed pumphead, pump impellor choked with welders snotters
picked out all detritus, refitted, all good
best of luck
The 28he has a fualt guide on the neons on the front.
If none of these are showing it will be the Plate Heat Exchanger or the pump in knacked.
If none of these are showing it will be the Plate Heat Exchanger or the pump in knacked.
Sponsored Links
As in first post the errors showing when it faults are E110 & E125 & now E133 has come on board!!
safety thermo and primary circulation cant find E133 at the mo.
Thanks again for the help, will split the pump shortly.
safety thermo and primary circulation cant find E133 at the mo.
Thanks again for the help, will split the pump shortly.
E133 interruption of gas supply or flame failure
Well I removed the pump and checked it.....
it wasn't spinning so I just to say touched it and it was away turned the power off then on and it never ran so I started it again and left it running for 5 or so mins then off/on and it spun on its own, stuck it back in and wahooo!! hot water and CH fingers crossed it has sorted the problem, we can now get a shower thanks for all the help
it wasn't spinning so I just to say touched it and it was away turned the power off then on and it never ran so I started it again and left it running for 5 or so mins then off/on and it spun on its own, stuck it back in and wahooo!! hot water and CH fingers crossed it has sorted the problem, we can now get a shower
thanks for all the help DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
