Ive got a baxi combi 80 eco boiler. After washing this morning i noticed that the hot water all of a sudden started running cold and wouldnt get hot again. The radiators cooled down and unable to get hot again. Looked at the boiler and found that the pilot light has gone out. All the lights are on on the front of the boiler. Ive had a look at previous posts seems it could be the fan??. I dont know for sure but would like an idea before i call someone out. Cheers
baxi no pilot
- Thread starter paulturn
- Start date
have you tryed resetting it 
hi,
Yes ive tried pressing the reset button but makes no difference and when ive pressed it it doesnt feel like it clicks or needs pressing
Yes ive tried pressing the reset button but makes no difference and when ive pressed it it doesnt feel like it clicks or needs pressing
eco 80 does not have a reset button
exept on the overheat stat
you turn the selector switch to r
exept on the overheat stat
you turn the selector switch to r
right lol. Thought the tiny red button on pipe inside boiler was a reset button. Ive turned the selector to r and turned remote stat up to full but still no joy
ok
what is /isnt lit up
is there any noise
what is /isnt lit up
is there any noise
Cheers for your help the only light on the boiler is the on light. Both pilot lights on the cover are out. Ive just messed with the stat again and sounded like the boiler fired up and continued to run but ther was no pilot light on
i think the noise i can hear is the pump running
Have you checked the pressure.
yes the pressure is just over 1 bar cheers
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
