Hi,
I was wondering if anyone here might have advice for my issues. I’ve had good Google and looked at videos first, but don’t seem to be able to find the answer I’m look for.
recently (around a month ago) my boiler was serviced and the system flushed. I noticed afterwards that the pressure was low, I rang my heating engineer and he said that the system just needed pressurising so just briefly turn one of the valves (I think the right one) until the pressure rises.
everything seemed fine. However, today I checked the pressure and it was in the red (around 2.5). I bled a radiator to lower the pressure (now in the mid green - around 1.5), after an hour the pressure seems to be rising though. My question, is are either of the valves still open? As I only turned one at the time. Through searching online it seems like you turn both valves to pressurise but I was only told to turn one.
I’ve attached a photo of the current settings, does this look correct?
thank you
Ian
I was wondering if anyone here might have advice for my issues. I’ve had good Google and looked at videos first, but don’t seem to be able to find the answer I’m look for.
recently (around a month ago) my boiler was serviced and the system flushed. I noticed afterwards that the pressure was low, I rang my heating engineer and he said that the system just needed pressurising so just briefly turn one of the valves (I think the right one) until the pressure rises.
everything seemed fine. However, today I checked the pressure and it was in the red (around 2.5). I bled a radiator to lower the pressure (now in the mid green - around 1.5), after an hour the pressure seems to be rising though. My question, is are either of the valves still open? As I only turned one at the time. Through searching online it seems like you turn both valves to pressurise but I was only told to turn one.
I’ve attached a photo of the current settings, does this look correct?
thank you
Ian