I have a baxi solo 2 50pf gas boiler, im just going to tile the floor in my kitchen so i removed the gas cooker, i turned off the gas at the ECV and at the lever valve at the boiler pulled out the cooker and disconnected the flexi hose via the bayonet and pulled out the cooker, as the floor is not tiled yet i wanted to turn on the heating i then realised the bayonet locks itself off when disconnected so i turned back on the ECV and lever valve at boiler turned on the boiler and now she wont fire the boiler light comes on and the fan light but notting else happens. Any ideas? what did i do wrong