- Joined
- 20 Aug 2004
- Messages
- 5
- Reaction score
- 0
- Country
Hello,
I've Just been burgled and I would like to change an old floodlight which is on my garage in the back garden(controlled by switch in garage or switch in kitchen)to a floodlight with PIR sensor. The wiring in the new floodlight is as follows:
4 block connector, 1 with 2 white wires, 1 with 1 brown wire, 1 with 1 earth, 1 with 1 white plus 1 blue, where the old floodlight only had 3 connectors 2 white and 1 earth.
There are two cables to connect to this, 1 from the switch in garage:1 earth, 1red, 1black and 1 cable from consumer unit 1 earth, 1 red 1 black, where do they all connect to? Hope i've been clear enough
Any help appreciated Many Thanks
I've Just been burgled and I would like to change an old floodlight which is on my garage in the back garden(controlled by switch in garage or switch in kitchen)to a floodlight with PIR sensor. The wiring in the new floodlight is as follows:
4 block connector, 1 with 2 white wires, 1 with 1 brown wire, 1 with 1 earth, 1 with 1 white plus 1 blue, where the old floodlight only had 3 connectors 2 white and 1 earth.
There are two cables to connect to this, 1 from the switch in garage:1 earth, 1red, 1black and 1 cable from consumer unit 1 earth, 1 red 1 black, where do they all connect to? Hope i've been clear enough
Any help appreciated Many Thanks