Hi,
My BEKO WMB81241 washing machine was working fine until the belt started to fray and managed to cut the wires to the Thermostat Temperature sensor. I re-soldered the two green wires back onto the connector (no polarity indicated so presume wires can go either way! tried both ways anyway...) but now all i can get the machine to do is Rinse! I have tried resetting, running a self-test and even leaving the machine OFF for 24hrs but none of this has worked. I replaced the thermostat but this has not helped either! i have drained the machine completely and still no joy. If i unplug the sensor the machine works fine, but the wash is cold. if i replace the with a hot fill, it also works fine! but again without the temperature sensor plugged in! any help would be appreciated, before i lose my rag with this BEKO crap machine...
My BEKO WMB81241 washing machine was working fine until the belt started to fray and managed to cut the wires to the Thermostat Temperature sensor. I re-soldered the two green wires back onto the connector (no polarity indicated so presume wires can go either way! tried both ways anyway...) but now all i can get the machine to do is Rinse! I have tried resetting, running a self-test and even leaving the machine OFF for 24hrs but none of this has worked. I replaced the thermostat but this has not helped either! i have drained the machine completely and still no joy. If i unplug the sensor the machine works fine, but the wash is cold. if i replace the with a hot fill, it also works fine! but again without the temperature sensor plugged in! any help would be appreciated, before i lose my rag with this BEKO crap machine...
