Belling 930 regulator

[stu9000]

After reading an old thread on here I ordered an 41ER102C1P to replace an 31ER14MHT.

What turned up was an ego 50.52021.010, which the company assured me would fit my belling 930.

Does anybody know how to wire this thing up correctly? It has the following terminals, two P1, 2, 4, Pilot and P2.

Any help would be greatly appreciated.

 

[delmel]

who did you order if off. I would have thought you could get the same regulator. It is important to ensure you either take a picture of mark on a drawing which terminals are in use and which cable connects to it. Hope you have not taken off before doing that.

 

[delmel]

https://www.bellingspares.co.uk/dual-hob-energy-regulator/product.pl?pid=803688

 

[delmel]

https://www.cookerspareparts.com/co...nuine-41er102c1p-oven-energy-regulator/ts-162

looks like its available still

 

[delmel]

41ER102C1P (Diamond H)

Live is P1
Neutral is 4a
Load is 2
Pilot is 4


ego 50.52021.010 are you sure about the correct number not being 50.57021.010

if it is 50.57021.010

Live P1
Neutral is 4
Load is 2

Pilot s2 or pilot

 

[stu9000]

Sorry for the late reply. Hectic week! Thanks for the info. Cookerspareparts is where I ordered from. They sent the 50.52021.010 saying it supercedes the 41ER102C1P. I am trying to get a return sorted as they could not provide any wiring diagrams and the ego is not what I ordered.

I'll try ordering the 41ER102C1P from somewhere else once I get a refund