Bending hep20 pipe
- Thread starter baker332
- Start date
Sponsored Links
Of course you can acheive a 90 degree bend but if you want a tight bend then you will need to use a support unit such as these
www.cityplumbing.co.uk
Hep2O Cold Forming Bend Fixture Grey 15mm HX75/15
Designed in either push-fit or solvent weld joints, the Hep2O cold forming bend fixture allows the formation of a bend on pipes for situations where secure fixing and neatness are important. Containing a pre-drilled fixing hole which is suitable for wood screw, these bends create a tighter bend...
www.cityplumbing.co.uk
Thanks for this info - seems quite simple really!Of course you can acheive a 90 degree bend but if you want a tight bend then you will need to use a support unit such as these
Hep2O Cold Forming Bend Fixture Grey 15mm HX75/15
Designed in either push-fit or solvent weld joints, the Hep2O cold forming bend fixture allows the formation of a bend on pipes for situations where secure fixing and neatness are important. Containing a pre-drilled fixing hole which is suitable for wood screw, these bends create a tighter bend...
As suggested, depends on how tight a bend you want but they will bend to 360Deg, they are supplied in coils.
Attachments
Sponsored Links
As suggested, depends on how tight a bend you want but they will bend to 360Deg, they are supplied in coils.
Lol I guess but that is a large bend!
Of course, was a little tongue in cheek
the cold former is the tightest really that it would need to go for practicality but it can go to 180deg in UFH loops so the radius can be quite tight. It's a feel thing with HEP and JG plastic. Depends on how tight you need it I guess.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
