Big essex flanges
- Thread starter mrgas
- Start date
- Joined
- 21 Oct 2006
- Messages
- 59
- Reaction score
- 1
- Country
So I've taken your advice and phoned them.
They go up to 3 inch.
What also I find interesting is why are they called essex flanges, when they are and always have be made in Liverpool?
What about Surrey flanges and Warwich flanges?
They go up to 3 inch.
What also I find interesting is why are they called essex flanges, when they are and always have be made in Liverpool?
What about Surrey flanges and Warwich flanges?
D
Dean744PiN5
its because the flange darn south is much better 
Maybe it's because the gaskets are so thick 
It's worth speaking to them about your application because they supply different gasket materials for different applications. The standard ones as sold with units supplied by BES for example are too hard for use in DHW cylinders.
Also avoid smearing any type of sealant on the gasket face because it makes the gasket creep out as you tighten the nuts.
It's worth speaking to them about your application because they supply different gasket materials for different applications. The standard ones as sold with units supplied by BES for example are too hard for use in DHW cylinders.
Also avoid smearing any type of sealant on the gasket face because it makes the gasket creep out as you tighten the nuts.
its because the flange darn south is much better
When I read the thread title, I thought I was on a different website for a second.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
