Hi, I have a single 13A plug socket at knee height that has a vertical spur to a second single plug socket at about 1.5metres from floor.
Knee height socket will be covered with a cabinet and drawer unit screwed to wall (in a storage room).
I want to safely cover where the knee height socket is but have the option to use it in future.
The socket at 1.5m height I want to convert to a double plug socket.
Was thinking of replacing the knee height socket with a cover plate/junction box like in the pic below (a 20ATenby one), but where do I get one/which make or what are my regulation-following alternatives.????
Forgive me if all blank plates have a junction on the back.....
I would cut a hole in the cabinet back to allow access to the cover plate/junction box
the front of the junction plate in the pic looks like a blanking plate i.e. flat and unfeatured. It fits in my mates house over a standard 1G box.
apologies for the enormous pic!
many thanks
Knee height socket will be covered with a cabinet and drawer unit screwed to wall (in a storage room).
I want to safely cover where the knee height socket is but have the option to use it in future.
The socket at 1.5m height I want to convert to a double plug socket.
Was thinking of replacing the knee height socket with a cover plate/junction box like in the pic below (a 20ATenby one), but where do I get one/which make or what are my regulation-following alternatives.????
Forgive me if all blank plates have a junction on the back.....
I would cut a hole in the cabinet back to allow access to the cover plate/junction box
the front of the junction plate in the pic looks like a blanking plate i.e. flat and unfeatured. It fits in my mates house over a standard 1G box.
apologies for the enormous pic!
many thanks