Boiler Clock problem.

[Stephen19]

The clock keeps stopping/sticking. Its on that old C&M Minima MX2 24FF (yes, I know its not a good one but please, no-one bother making comments on that....just dull now).
Its a 'grasslin' make I think, not sure. Question, how easy to get hold of one, what sort of price and any other make/style useable and would that be a better option than going for the C&M make?
Thanks and seasons greetings to all.
Stephen

 

[Stephen19]

Any takers for this question?
Thanks
S

 

[gas4you]

Don't know if original is still available, but can't see any reason why you could not add an external timer of any make and either remove this one or leave it on constant.

 

[kirkgas]

is it a combi boiler or a system boiler with a hot water cylinder

 

[Agile]

The current clocks are about £25 upwards as a generic item but you would probably have to match it with another boiler which might be difficult.

As Dave says, fit an external one!

Tony

 

[Stephen19]

is it a combi boiler or a system boiler with a hot water cylinder

Thnaks, its a combi boiler.

 

[Stephen19]

Don't know if original is still available, but can't see any reason why you could not add an external timer of any make and either remove this one or leave it on constant.

Would teh power supply be an issue with ti ssolution and where would the new clock sit? Thanks

 

[kirkgas]

as it is a combi simply fit a single chnnel programmer next to the boiler and connect the existing cables to it from the existing positions the new clock should have fairly straight forward instructions