Boiler Flue

[planemad]

Hi

I'm thinking of building a small conservatory this summer.
One issue that I will encounter is that the boiler flue is on the wall where the conservatory will go.

Is there a kit where I can do a 90 degree bend on the flue so that it will go outside?

Obviously I will not complete this work myself but its good to know if this is possible so that I can include it in my figures.

Boiler is a 2009 Vaillant Ecotec 831 Combi.

 

[FiremanT]

Hi

I'm thinking of building a small conservatory this summer.
One issue that I will encounter is that the boiler flue is on the wall where the conservatory will go.

Is there a kit where I can do a 90 degree bend on the flue so that it will go outside?

Obviously I will not complete this work myself but its good to know if this is possible so that I can include it in my figures.

There are flue options available, but you really need an RGI to vist, spec and quote.

 

[Agile]

The normal 90 degree elbows cannot be used outdoors although inside a conservatory would be oK.

The flue has to exit horizontally too and discharge somewhere suitable and not over your neighbour's garden.

Any flue modifications must be done by an RGI.

Tony